The AL6-RSPRSJB is a very high-performance gas discharge tube suppressor featuring wide-band operation up to 6 GHz. The unit features a bulkhead Reverse-Polarity SMA Jack connector with a rubber "O"-ring seal for mounting through an enclosure wall.
Due to its superior RF performance this unit is ideal for IEEE 802.11a and other 5.2 - 5.8 GHz ISM and UNII applications, as well as 3.5 GHz WLL applications. Since this protector will pass DC it is suitable for applications where DC is carried through the coax cable such as remote amplifiers and LNA's.
Both connector ports of this unit are equally protected. This provides protection no matter which way it is installed. Either port can face the antenna and either port can face the equipment.
The unit's replaceable gas tube element, multi-strike capability and fast response time make it suitable for a wide range of applications. A ground lug and terminal is provided directly on the lightning protector housing which provides superior grounding.
|
|
Details for this Lightning Protectors product
|
| HyperLink Item # | AL6-RSPRSJB-9 | | | |
| Manufacturer | Hyperlink | | | |
| RoHS Status | RoHS Compliant  (More) | | | |
|
|
|
Applications for this Lightning Protectors product |
|
IEEE 802.11a, 802.11b and 802.11g Wireless LAN applications
ISM
MMDS
Cellular
PCS applications
|
|
|
|
|
|
|
|
Specifications Electrical Specifications| Frequency Range | 0 - 6 GHz | | VSWR | 1:1.5 Max (0 - 6 GHz) | | Insertion Loss | 0.5 dB Max (0 - 6 GHz) | | Impedance | 50 Ohm | | Gas Tube Breakdown Voltage | 90 V ± 20% | | Gas Tube Impulse Breakdown Voltage | 1000 V ± 20% | | Gas Tube Insulation Resistance | 10,000 MΩ | | Maximum Withstand Current | 5 KA | | RF Power Rating (CW) | 10 W Continuous |
Mechanical Specifications| Connectors | RP-SMA Plug to Bulkhead RP-SMA Jack | | Connector Body Material | Nickel Plated Brass | | Body Material | Nickel Plated Brass | | Pin Material | Gold Plated Brass | | "O"-Ring Material | Rubber | | Bracket Material | Stainless Steel | | Ground Lug | 10 AWG Max. | | Max. Panel Thickness (Bulkhead Connector) | 0.125 in. (3.17 mm) Thick | | Dimensions (max) | 2.52 x .91 x 1.34 in. (64 x 23 x 34 mm) | | RoHS Compliant | Yes |
|
|
|
|
Accessories for this Lightning Protectors product . . .
|
|
|
|
|
|
| |
|
|
Customers who bought this Lightning Protectors product also bought . . .
|
|
|
|
|
|
|
|
|