Outdoor 10/100 Base-T CAT5 Lightning Surge Protector - RJ45 Jacks

Power-Over-Ethernet (PoE) Compatible

The AL-CAT5VW is a Compact Weather Resistant Lightning Protector which provides lightning and surge protection for CAT5 data applications. The unit is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed.

High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +/- 15 volts on pins, 1, 2, 3 and 6 and +/- 58 volts on pins 4, 5, 7 and 8. The unit is compatible with both normal and inverted polarity voltage PoE equipment. For maximum protection two AL-CAT5VW units should be used, one at each end of the CAT5 cable. Most PoE capable equipment is not protected from surges on it's CAT5 cable.

This Lightning Protector is compatible with both 10 Base-T and 100-Base devices as well as Power-over-Ethernet (PoE) devices, including Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE).

A ground lug and terminal is provided in the lightning protector housing providing superior grounding.

The compact weather resistant housing features a lockable hinged cover and break-away holes are provided on the rear of the enclosure for mounting. The cable grommets may be adjusted to cable size and are removable.

Cisco Compatible

This lightning surge protector is compatible with Cisco Aironet® 1100 and 1200 series access points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.

Not sure which protector is right for your application...Click Here for our Model Comparison Chart.

Specifications

Electrical Specifications

Mechanical Specifications