Lightning Protector Model AL-BMBFB-9 is a gas discharge tube suppressor featuring wide-band operation up to 3 GHz. This unit features a BNC-Male to BNC-Female Bulkhead connector with a rubber O-ring seal for mounting through an enclosure wall or with the included aluminum mounting bracket.
Due to its low cost and superior RF performance, this unit is ideal for IEEE 802.11b and 802.11g Wireless LAN applications, as well as ISM, MMDS, Cellular, and PCS applications. The AL-BMBFB is also well suited for protecting sensitive test equipment from electrical surges. Since this protector will pass DC, it is suitable for applications where DC is carried through the coax cable, such as remote amplifiers and LNAs.
Both connector ports of this unit are equally protected. This provides protection no matter which way it is installed. Either port can face the antenna and either port can face the equipment.
The unit's replaceable gas tube element, multi-strike capability, and fast response time make it suitable for a wide range of applications. A ground lug and terminal are supplied directly on the lightning protector housing, which provides superior grounding.
|
|
Details for this Lightning Protectors product
|
| HyperLink Item # | AL-BMBFB-9 | | | |
| Manufacturer | Hyperlink | | | |
| RoHS Status | RoHS Compliant  (More) | | | |
|
|
|
Applications for this Lightning Protectors product |
|
EEE 802.11b and 802.11g Wireless LAN applications
ISM
MMDS
Cellular
PCS applications
|
|
|
|
|
|
|
|
Specifications
| Electrical Specifications |
| Frequency Range |
0 - 3 GHz |
| Protector Complies With |
IEC / IEEE Standard |
| VSWR |
1:1.3 Max (0 - 3 GHz) |
| Insertion Loss |
0.4 dB Max (0 - 3GHz) |
| Impedance |
50 Ohm |
Standard Gas Tube Element:
DC Breakdown Voltage Indicated |
90 V 20% |
Available Gas Tube Elements:
DC Breakdown Voltages Indicated |
230 V 20%
350 V 20%
600 V 20% |
| Gas Tube Impulse Breakdown Voltage |
1000 V 20% |
| Gas Tube Insulation Resistance |
10,000 MΩ |
| Maximum Withstand Current |
5 KA |
| RF Power Rating |
Model
Suffix |
Voltage
Rating |
DC ~ 30MHz |
30500MHz |
500MHz3GHz |
| PEP1 |
CW2 |
PEP1 |
CW2 |
PEP1 |
CW2 |
| -9 |
90 Volt |
110W |
55W |
65W |
32W |
20W |
10W |
| -2 |
230 Volt |
280W |
140W |
110W |
55W |
40W |
20W |
| -3 |
350 Volt |
650W |
325W |
260W |
130W |
100W |
50W |
| -6 |
600 Volt |
2KW |
1KW |
800W |
400W |
320W |
160W |
|
| Mechanical Specifications |
| Connectors Comply With |
MIL-C-71A, 39012 Standard |
| Connectors Types |
BNC-Male to BNC-Female Bulkhead |
| Connector Body Material |
Nickel Plated Brass |
| Body Material |
Aluminum |
| Pin Material |
Gold Plated Brass |
| O-Ring Material |
Rubber |
| Bracket Material |
Aluminum |
| Ground Lug |
10 AWG Max. |
| Dimensions (L x H x W) |
3.2 in x 1.6 in x 0.8 in
(82 mm x 40 mm x 20 mm) |
| Weight |
3.17oz
(89.8g) |
| Environmental Specifications |
| Temperature Range |
-67F to 185F
(-55C to +85C) |
| Dust and Waterproof Rating |
IEC 529 / IP65 |
| Moisture Resistance |
MIL-STD-202 Method 106D |
| Salt Fog |
MIL-STD-202 101D/B |
| Temperature Shock |
MIL-STD-202 107D/A-1 |
| Vibration |
MIL-STD-202 Method 204D/B |
| Shock |
MIL-STD-202 Method 213B/A |
Notes:
1 - Peak Envelope Power (PEP): The average power supplied to the antenna transmission line by a transmitter during one radio frequency cycle at the crest of the modulation envelope taken under normal operating conditions.
2 - Continuous Wave (CW): A wave of constant amplitude and constant frequency. |
|
|
|
|
Accessories for this Lightning Protectors product . . .
|
|
|
|
| | | |
|
|
Customers who bought this Lightning Protectors product also bought . . .
|
|
|
|
|
|
|
|
|